DTH BITS

If you are drilling into hard and corrosive formations then the convex design would be an ideal choice. If you are drilling into rock types such as fractured and cracked, you will get the best results with a flat surface design.

The concave design is particularly suitable for deep wells and directional control. The reverse pilot design drilling system on its convex surface has been developed to maintain vertical alignment and directional control of the wellbore.

DTH HAMMER

Down-the-hole hammers are equipment designed to be used in ground reinforcement, drilling and mining in sizes ranging from 3” to 18”.

DTH Hammer SOLID 35 SOLID 40 SOLID 50 SOLID 60 SOLID 80
Shank Type  DHD3.5 DHD340 DHD350 DHD350 DHD360
Weight (kg) 22 42 61 98
Lenght (mm) 835 1071 1107 1107 1255
Outside Dia. (mm) 81 93 112 139
Working Pressure (bar) 6-16 6-20 8-20 8-25
Hole Range (mm) 89-102 105-130 140-165 165-203
Feed Force (kN) 5-15 7-20
Rotation Speed (Rpm) 25-80 15-60
Connection Thread  2 3/8 API REG 3 1/2 API REG

ROCK DRILLING SET

ANCHOR ROD

It is the equipment that used for rock machines to drilling of ground and tunnels.

Pipe Diameter Outer Diameter Length Material Quality Of Pipe Welding Tecnique
mm mm
3″/76 10 1000-6000 N80  Friction
3.5″/89 10 1000-6000 N80  Friction
4″/102 7,3 1000-6000 N80  Friction
4.5″/114 x 140 12 2000 N80  Friction
135 x 140 12 3000 N80  Friction

* We are able to produce any size on your demands.

Pipe Dia. Outer Diamater Lenght Quality of Pipe Material Quality of Sheet Material Welding Technique
mm mm
3″/76 x 10 140 1000-6000 N80  ST-52 Friction
3.5″/89 x 10 140 1000-6000 N80  ST-52 Friction
4.5″/114 x 12 250 1000-6000 N80  ST-52 Friction
4.5″/114 x 12 300 1000-6000 N80  ST-52 Friction
4.5″/114 x 12 450 1000-6000 N80  ST-52 Friction

* We are able to produce any size on your demands.

AUGER

AUGER ROD

It is a spiral drilling equipment that is generally used for rock drilling machines for ground and tunnel drilling. Due to this design structure, it is the equipment that performs the drilling process while transferring the soil to the outside.

ROCK BIT

Rock bits have been strategically designed to work with any formations. They are spiral shaped which helps to drilling into the soil without having to apply a significant amount of pressure. Various angled holes through bits are helps to flow of drilling fluids for the cooling and cleaning.

ROCK-BIT
Thread Type Weight(kg) Length(mm) Cutters Type Cutters Amount Cutters Diameter(mm) Insert Type
ISO 10208 76 – 89 4.1 – 49.9 250-450 Round/Bullet  4-24 19/25 Pin/Box

AUGER ROD ADAPTERS

TIJ AUGER

TIJ-AUGER

FEMALE – MALE

It is the adapter element used to connect the pin-tipped rod and the box-tipped rod.

Female – Male
Female A Male B Diameter A Diameter B Length Wrench flat Weight
mm mm mm mm kg
2 3/8″API Reg 2 3/8″API Reg 77 77 140 65 4.0
2 3/8″API Reg 2 3/8″API Reg 90 90 140 65 5.5
2 3/8″API Reg 2 3/8″API IF 95 95 130 65 8.0
2 3/8″API Reg 2 7/8″API Reg 90 102 120 95 10.5
2 7/8″API Reg 2 3/8″API Reg 90 90 154 65 6.5
2 3/8″API Reg 2 3/8″API Reg 102 102 130 76 7.8
3 1/2″API Reg 2 7/8″API Reg 115 115 160 95 10.8

MALE – MALE

It is an adapter used to connect two pin-tipped rods to each other.

Male – Male
Male A Male B Diameter A Diameter B Length Wrench flat Weight
mm mm mm mm kg
2 3/8″API Reg 2 3/8″API Reg 90 90 70 65 4.6
2 3/8″API Reg 3 1/2″API Reg 90 115 97 95 9.0
3 1/2″API Reg 3 1/2″API Reg 115 115 90 95 10.0
TIJ-AUGER-MM
TIJ-AUGER-FF

FEMALE – FEMALE

It is an adapter used to connect two box-tipped rods to each other.

Female – Female
Female A Female B Diameter A Diameter B Length Wrench flat Weight
mm mm mm mm kg
2 3/8″API Reg 2 3/8″API Reg 77 77 200 65 4.5
2 3/8″API Reg 2 3/8″API Reg 90 90 200 65 6.0
2 3/8″API Reg 2 7/8″API Reg 90 90 225 65 6.2
2 3/8″API Reg 3 1/2″API Reg 115 115 210 95 10